Tomax 400W - Magnetic Ballast
-
Code:3615
-
Weight:5.800 Kgs
Electromagnetic Trigger-Regulator for Sodium and Metal-Halide Lamps
This ballast allows the stabilization of the current supplied to the output while ensuring greater stability of the luminous flux and therefore longer lamp life. Closed body type for further insulation and safety.
Suitable for lighting HPS and MH 400W bulbs.
Power: 400W
Voltage: 220-240V / 50Hz
Works with both HPS and MH lamps
Easy to mount
Long distance for connection to the lamp, up to 15 m
Thermal switches for short circuit protection
Pre-connected input and power cable
CE certified
Fuse: Yes
Quick Buy
The product is intended for use with high-intensity discharge lamps and high-intensity discharge reflectors.
Electricity can cause death, so always use a circuit breaker with this product.
Before doing anything with the device, make sure the power is off.
After switching on, allow the appliance to discharge, leaving it on for at least 3 minutes before switching it off.
The appliance and especially the lamp will become hot during use. If the lamp is on, allow it to cool for at least 3 minutes before touching it, and never touch the lamp while it is on.
Never stack the appliance on top of each other, as the appliance dissipates heat through its housing.
Never switch on the device without the lamp and reflectors on.
Make sure you use a lamp and reflector compatible with the device.
Installation
Please make sure that the device is on a stable, non-flammable surface and that there is sufficient ventilation around the device. Also, make sure that any protective plastic coating on the reflector is removed before turning on the system.
Troubleshooting
If the system does not work, turn it off, wait 30 minutes for the lamp to cool, then unscrew the lamp and screw it on again. Turn on the device again. If the lamp still does not work, contact us.
The ballasts regulate the voltage applied to the selected lamp, to the working one for it and ignite the lamp, creating a high-voltage pulse after the current from the starter is interrupted. Magnetic chokes are compact and cost-effective devices that are suitable for "lighting" lamps from 250W to 1000W. It is recommended that in smaller growing rooms, the chokes stay out of them, as they convert some of the electricity they absorb into heat and thus can contribute to an increase in temperature.
The product is provided with a warranty for defects for a period of 18 months from the date of purchase. During this period, the appliance can be returned to the seller with proof of purchase (receipt). If a defect is found, it will be repaired or replaced. This warranty does NOT cover misuse of the appliance, accidental damage (dropping, wetting), repairs by unauthorized persons.
