TRIMPRO TRIMMERS

The most advanced and efficient power-free trimming unit ever developed, no aspect of the TRIMPRO UNPLUGGED has been overlooked in its design.

The size, weight and shape, along with the reversible trimming action, all contribute to its ideal ergonomics. The leather fingers are treated with natural oils to reduce adhesiveness and maintain their suppleness. The stainless steel blades are of the highest possible quality, and of course, blade height is adjustable as with all TRIMPRO products.

TRIMBOX LEAF TRIMMING MACHINE Built on the same principles as the Trimpro Original, the TRIMBOX is designed for smaller producers.

Easily mounted on any workbench with brackets & clamps (included), the lightweight Trimbox is very efficient and provides impressive results. For trimming, take a branch of a freshly harvested plant in your hand and move it over the grate with a back-and-forth motion while rotating the plant at the same time.

TECHNICAL DETAILS: FORMAT:

Machine: 8.6" (diameter) x 9.2"

Packaging: 12" x 9" x 10"

WEIGHT: Approximated Weight: 14 lbs

MATERIAL: Cylinder material: PVC.

Grate material: Aluminium

TRIMPRO ROTOR LEAF TRIMMER

The new TRIMPRO ROTOR has been designed and developed at the request of end users who are looking for yet another gentle and efficient Trimpro quality product. Employing leather fingers to circulate your flowers over our non-stick grate, the leaves are trimmed by our razor sharp tempered steel blades. Built at an angle, emptying the Rotor is as simple as swinging the latch to open the door and your perfectly trimmed flowers gently exit the upper cylinder, all while the machine is still running so production is non-stop. As with all our machines, the blade height is adjustable to meet every preference.

For trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer and let the Rotor do the rest (See PDF beside).

GENERAL WARNINGS:

Never place your fingers, gloves or any other body part in contact with the grate or the blade.
Never apply pressure on the grate.
Do not use scissors, knives or any instrument above the grate.
Safety glasses and gloves are required at all time.
The gloves have to be tight enough so they don't get inside the grate slots. A loose glove is dangerous.
BE AWARE!
The manufacturer does not accept any responsibility for damages caused to or by the trimmers resulting from an inadequate use or assembly. Use the trimmers in accordance with existing laws and regulations.

TECHNICAL DETAILS:

FORMAT:
Mounted machine: 16" Diameter x 21"
Packaging: 21" x 21" x 24"

WEIGHT:
Machine only: 30 Lbs
Machine and packaging: 42 Lbs

MATERIAL:
Frame: Aluminum
Grate: Steel

Our other boutique model is the TRIMPRO WORKSTATION.

The Stainless Steel grate is just 1/16 of an inch thick allowing for an even closer cut. The circular hand movements and downward pressure ensures each flower is trimmed to the operators desired level of perfection.

For trimming, separate the fresh flowers from the branches and roll the flowers on the grate in a circular movement with your hands.

For trimming, separate the fresh flowers from the branches, put them into the upper container of the trimmer and let the Trimpro Automatik XL do the rest (See PDF beside).

TECHNICAL DETAILS:

FORMAT: Mounted machine: 39" x 36" x 51"

Height Packaging: 35" x 35" x 31" Height

WEIGHT: Machine only: 162 Lbs

Machine and packaging: 195 Lbs MATERIAL:

Frame: Aluminium

Grate: Steel GRATES

OPTIONS: Option 1: Trimpro Automatik XL (STD): large slots only (7/16") Option 2: Trimpro Automatik XL small : Small slots only (1/4")

The Rotor XL trimmer’s 6 rotating arms support 24 high-quality, stick- resistant leather fingers, designed to gently move flowers around the non-stick grate, allowing tempered steel blades below to trim leaves carefully and efficiently.

Control is optimized with finger and blade speeds individually variable, and adjustable height control for both the finger support arms and cutting head. The clear, hinged, drum-cover further enhances control, increasing visibility to reduce the need for ‘second-pass’ processing. With secondary material falling securely into the workstation’s redesigned catch-bag system, touch-less extraction completes the process, with flowers exiting effortlessly through the unit’s gate, once unlatched.