Probe cleaning is one of the most important parts of owning or operating anyBluelab meter, monitor or controller.

If the probe is contaminated or dirty, it affects the accuracy of the reading displayed. The Bluelab Truncheon® Meter and Bluelab Conductivity Probes read low when the probe is contaminated.

The probe surface is where the instrument takes the reading of the solution. The information is sent back from the probe to the electronic brain of the instrument. A calculation is then done in the instruments brain or micro-computer and a reading is then displayed. If the information sent back from the probe is inaccurate due to probe surface contamination then the reading will be inaccurate.

Cleaning the conductivity probe is a very easy task and prolongs the life of your probe.

• Cleaninginstructionsinside box lid
• 500ml 2.77 EC Conductivity Standard Solution
• Decanter vessel
• Bluelab Conductivity Probe Cleaner
• Bluelab Chamois(probe cleaning instrument)

Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe.
 
The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution or soil accurately.

The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth.
 
Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe.
 
The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution or soil accurately.

Cleaning Solution for pH Electrodes (HCL), 300 ml

Proper cleaning and storage is extremely important if you want to read accurate tester results.

If the probe is even slightly contaminated, this affects the accuracy of measurement. Cleaning the pH meter is actually a fairly easy task, which in addition to maintaining accuracy, extends the life of the device.

Each meter requires maintenance, service and technical check, even if its broken. This process is called calibration, performed correctly, calibration increases productivity, provides consistency, compatibility with testers.

Keep your probe clean! This Bluelab pH Probe Cleaning Kit is one of the most important parts of owning and operating any Bluelab meter or monitor. If the electrode is contaminated or dirty, it will affect the accuracy of the reading displayed.

Includes:
• Full color instructions
• pH4.0, pH7.0 and KCI Calibration Solutions (20 ml sachets – 2 ea.)
• 3X plastic vials
• Probe cleaner
• pH probe cleaning tool & toothbrush

Grower’s Tip:
pH probes are scientific instruments and should be cleaned and calibrated regularly to extend their life.

The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth.
 
Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe.
 
The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution or soil accurately.
 
A tip… if the conductivity reads low, the probe needs cleaning. pH probes specifically, should be kept wet at all times for optimal performance and life.