GAVITA KITS

The Gavita HortiStar 600 reflectors are available with a Vega aluminum reflector, which can be replaced if necessary without even having to unscrew the bulb from the socket.

The set is suitable for use with HPS / MH lamps with power up to 750W. Installation is easy - with only two bolts.

Reflectors lose more than 5% efficiency, on average, per year due to deposits, dust accumulation and oxidation. This is a valuable light that cannot reach your plants. Tests show that it is almost impossible to clean reflective material without damaging it, and for this reason Gavita believes that it is important that the reflectors you use are made of the best materials and that parts of the reflector can be replaced if necessary.

• Suitable for any HPS or MH lamp with power up to 750W
• High quality Vega aluminum HortiStar HR 96 reflector
• 96% light reflection
• Professional and compact design
• Interchangeable reflective surface
• Durable and safe
• Easy installation with just two bolts
• CE logo 75px

With ECM1, you can extend the functionality of your EL2 controller to include ancillary equipment, such as heaters, dryers and CO2 equipment, when the lights are on or off, according to the lighting time set by the controller. These contact devices can include loads of up to 15 amps when the lights are on or off. Because ECMs are controlled by a low voltage signal, you can even place them close to the appliances themselves, allowing for easy installation and optimal flexibility.

Gavita Master controller EL1

 
Lighting control at your fingertips!

Using a Gavita Master controller to control your e-series fixtures offers you maximum control, ease of use, plug and play installation and safety. Just connect the controller cables to the fixtures with the included T-splitter (see diagram), set the dials on the fixtures to EXT (External control), plug the controller and the fixtures directly into mains and you are set to go.

The controller can switch all the interconnected fixtures on and off with its internal timer, adjust them to your required output level (in percentage or exact output power) and even simulate sunrise and sunset to gradually adjust the climate in your grow room when your lights go on or off. This electronic controller replaces expensive lighting timers and contactors while preventing ballast current in-rush when switching on your lights.

Two very important features are the autodim function and emergency shut-down. When the temperature in your grow room rises beyond the control level of your climate control your crop can be damaged beyond recovery. The temperature probe senses this and will automatically dim the lights to not overshoot your safe temperature, and maintain it. The display and warning LED indicate when this happens, and also indicate if this has happened while you were away so you can correct the problem. If for any reason your climate control completely fails and the temperature rises to unacceptable levels the system will perform an emergency shutdown of all connected equipment. The alarm contact of the controller can be connected to your alarm system for instant notification.

You can connect all your e-series fixtures to one controller.
 

The Gavita Pro E-Series are enhanced models of the already existing classic series of Gavita lighting modules, now compatible and customized for complete lighting control via the Gavita Master controller. You can now control the light with just a few simple keystrokes. Gavita Pro HPS modules are the professional standard for efficient lighting. Operating on standard 240V, they power high-voltage (400V) electronic cutting lamps, which are superior to conventional ones in terms of spectrum, emitted light and lamp efficiency with extended use.

New in the e-series of the Pro line is the 6 / 750e DE FLEX module, which uses the recently developed Gavita Pro 750W DE 400V EL lamp.

The operating range of the lamp is 400-825W, which takes up a huge difference between 600 and 1000 watt lamps. We called it 6/750 DE FLEX because it is equally efficient when running at 600 watts as it is at 750. In many cases, it is appropriate to replace a 1000 watt ventilated module running at 825W, which can save you up to 20% electricity . The emission of the lamp operating at 750W is 1500 μmol s-1 (2μmol s-1 per watt).

Gavita Pro HPS modules are a professional standard for efficient lighting. Operating on standard 240V, they power high-voltage (400V) electronic crop lamps, which are superior to conventional ones in terms of spectrum, light emitted and lamp efficiency with prolonged use.

• Fully encapsulated wiring with ventilation outlet made of GORE-TEX, without moving parts, completely quiet and almost imperceptible heat dissipation.
• Compatible with high frequency electronic (400V) agricultural lamps, which have 10-25% higher light emission.
• Highly efficient - retains more than 95% of its light-reflecting properties, so you only need to change the bulb once a year.
• Replaceable Gavita HR96 reflector with 96% reflectivity for maximum efficiency.
• Controlled emission: With one knob, increase or decrease the amount of light supplied, according to the conditions or stages of development of your plants.
• A system for "soft" reduction of light, allowing gradual reduction of the emitted light, which eliminates the stress on the lamp when changing the current supplied to it.
• Equipped with high frequency (> 100kHz) Gavita electronics.
• No problems created by electromagnetic interference.