OTHER FAN CONTROLLERS, LIGHTING AND POWER

It regulates the speed of lights from 0 to 280W.

The lights in our growing place can be connected to the power regulator reducing or increasing the lights' strenght.

Specifications of Speed ​​Power Controller / Dimmer Potentiometer Cornwall Electronics EU (280W)

- Mark Cornwall Electronics
- Power regulator
- LED power indicator
- Voltage: 230V
- Frequency: 50Hz / 1.6A
- 0-280W

Allows control of heating and cooling systems as needed.

In the first case the connecting unit when the current detected elétrica temperatures below the set point, in the second case connects the electric current when detected temperatures above the point recorded.

Tempcon VDL is a temperature controller that is responsible of switching on/off heaters or coolers depending on the needings of your growroom.

Temperature controller Tempcon by VDL has an in-built probe that allows it to boot/shut-down all deviced connected to through it, to make more efficient the use of heaters or air conditioners.

VDL Tempcon is a plug-in temperature controller, that lets your switch on/off enviromental devices when detecting temperatures lower or upper than set up.

Tempcon has two main functions:

• Keep minimum temperature under control.
• Keep maximum temperature under control.
• One chosen the function we want Temcon set our devices to work, it will only be necessary to set up the temperature to keep.

Tempcon allows growers to connect heaters, fans, extractors, air conditioners or any electronic device that might be used for increasing/decreasing temperature.

• Maximum load: 16A - 3680w (resistive) / 16A - 480W (inductive).
• Temperature range: 0ºC to 40ºC.
• Precision +/- 1ºC.

Allows you to control a pump based on the relative humidity selected.

It has two functions, so humidifier and so dehumidifier control and any of the two devices can be connected to the controller. It displays digital reading room humidity, and can exercise effective control of the humidifier / dehumidifier that is connected at that time.

Humicon is a wall socket unit which is able to control an extractor according to the level of humidity.

This unit comes with an option of connecting a humidifier or dehumidifier. This unit is completely digital and constantly displays the current humidity of the environment.

• Maximum charge: 16 A - 3680 W (resistive) 16 A - 460 W (Inductive)
• Control range: 30 - 90 %
• Operating temperatures: 0 - 40 ºC
• Precision: ± 5% 

The T15 series can switch on and off devices (fans, heaters, alarms) at a set temperature. The T15 series is intended for single-phase use.

Benefits 

• Low investment
• Easy to install
• Easy to operate
• Durable and robust
• Applicable for both new and existing ventilation systems

Feature T15-WD 
Switches single phase devices on and off at a set temperature