WATER PUMPS

NHA7000 Specifications:
Voltage 230V ~ 50 Hz
Power - 400W
Maximum flow rate - 7000 l / h
Maximum height - 7m
Depth - Max 5m
Outlet Diameter 1" - 1½"
Cable length 10 m - H05RNF 10 m
Maximum particle size - 5 mm
Minimum water level - 7 cm
Certificates - ROHS / LVD / CE / EMC

Wave Maker 3000 - stirrer pump 6W 3000 l / h

Wave Maker 3000 is a pump designed to stir the nutrient solution in the tank. Protects water in the tank from stagnation and therefore loss of oxygen. The more water is circulated, the more oxygen will be enriched. The device has a hinged spherical joint that allows 360 ° rotation.

• Power: 6W
• Capacity: 3000 l / h.
• Dual wave drive with a maximum power of 12,000 liters per hour
• Equipped with a high-quality suction syringe for easy attachment

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance. If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 10 W
• Maximum height: 1 mt
• Flow rate: 600 L / H
• Voltage / Frequency: 220-240v / 50hz

This pump can be used for small drip systems up to 1 m2 max.

Often used as a circulation pump in water tanks or bio filters.
Even small NFT and Ebb&Flow systems can be handled with the WaterMaster pump.
Saltwater/ Fertilizer resistant.

• Power: 5W
• Voltage:220-240V
• Frequency: 50 Hz
• Pump rate: 400 l/h
• Max Hight: 0.8 m

The circulation pump RP is one of the most commonly used among circulators.

RP models circulators are immersed completely and are suitable for many applications.These pumps are extremely nadezhdni.Otgovaryat international standards, and the compact size makes it easy to install, even in smaller spaces. Circulators are hose connections sizes 13 mm and 20 mm and are associated with variable flow regulator. These circulators are easy to maintain and are equipped with 1.5 m kabel.Pompi RP 400 L / h have a capacity of 400 liters per hour.

Manufactured with high quality plastic materials inside a sealed structure, its engine manufactured completely watertight and cooled by oil, which has a filter inside to avoid obstructions in the operating mechanism, it consists of a thermostat that stops the engine in case of overheating.

You must always have it in the water for proper use and never deeper than 2mt. You should not work with it in temperatures above 35º

Depending on the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. If you are going to use an irrigation lance it is recommended at least 2000l / h for a bit of water flow, with 3000l / h you will get a normal pressure and with 4000l / h you will get the ideal pressure for the lance. If its use is going to be used for drip irrigation, a minimum of 1000l / h is recommended for each square meter of crop.

Specifications:

• Depth max: 2 mt
• 10mt power cable.
• Power: 18 W
• Maximum height: 1.3 mt
• Flow rate: 800 L / H
• Voltage / Frequency: 220-240v / 50hz